Make your computer to be a Wi-fi Hotspot by using My WiFi Router v1.01.

My W-FI Router is a virtual WiFi router tool which can converts your PC/Laptop into a WiFi Hotspot. This can be used to share the Internet on your computer with multiple device. You can also share files and folders with the devices which are connected to your network..

 Key features:

Easy to create a secure and customizable wifi hotspot

Just 3 steps: Install My wifi router -> Set your own hotspot name and passwords –> Start, now you have converted your windows XP, 7 & 8 laptop into a virtual wifi router and creates a secure wifi hotspot.

Share Internet Connections

You can share single internet connection(LAN, Ethernet, Data-Card, 3G/4G, Wifi) for multiple devices like laptops, smartphones, android phones,PDAs, Ipads.

Display and Manage Connected Devices

You can see the details of the connected device(Name, Ip Address, Mac Address), and also manage which device have the access to the virtual hotspot.

Auto & Manual Internet Selection

Automatically configure your hotspot’s Internet sharing settings or you can configure the internet manually.

Extends your Wifi range

Extend the range of your home or office Wi-Fi with just a few clicks.

Installation:

1- Extract archive with WinRAR or 7Zip.

2- Install the program .

3- Enjoy this software.

How to Troubleshooting Black Screen Displays with No Error Messages During Start-up or Boot

There are many reasons that a computer does not startup or boot into the Windows operating system. If your computer will not start or boot, you will see or hear symptoms to indicate the general area of the problem. If you are not sure what the problem is:

Computer Does not Start (Windows 7, Vista, XP) 
This document lists the symptoms you see if the computer does not start, provides an overview of the complete troubleshooting process, and links to other documents with step-by-step details to restore the computer to proper operation. If your computer does not startup or boot into Windows, use this document to troubleshoot and correct the problem.

DO THIS FIRST - Perform a hard resetIf the computer suddenly fails to startup properly, perform a hard reset as the first action. Performing the hard reset will correct many problems. If the computer still does not start properly, select your symptom from the list below to guide you to the recommended corrective actions.

1. Disconnect all peripheral devices and remove all USB devices and SD media cards.
2. Disconnect the AC power adapter, remove the battery, and then press and hold the power button for at least 15 seconds to drain all residual power and restore default startup settings.
3. Reconnect the AC power adapter (but do not insert the battery), press the Power button, look for glowing lights near the caps lock and num lock keys, and listen for sounds of a fan or other moving parts turning.If the computer starts normally after performing a hard reset, you are done troubleshooting. Otherwise select the symptom below that best describes your issue and perform the troubleshooting steps provided.

FIX A BLACK SCREEN DISPLAY:

DO THIS FIRST - Perform a hard reset
If a PC suddenly fails to boot properly, you should perform a hard reset as the first procedure.
Disconnect all peripheral devices and remove all USB devices and media cards. You want to test the computer not the accessories!
Disconnect the AC power adapter, remove the battery, and then press and hold the power button for at least 15 seconds.
Reconnect the AC power adapter (but do not connect the battery), Press the Power button,Look for glowing LEDs near caps lock and num lock keys, and Listen for sounds of a disk drive and fan turning.

Actions to take after performing hard reset

If no error message is displayed:

• Connect an external monitor to test the display
• Test for memory module problems
• Test the hard drive
• Contact manufactures(HP, DELL,TOSHIBA, etc) for technical assistance

If the display remains blank (black screen or white screen) after doing a hard reset, temporarily connect an external monitor to test the notebook's display. If an image displays on the external monitor, continue to perform the tests, install drivers, and make adjustments as described in the next section.

FOR ANOTHER ALTERNATIVE YOU CAN USE THIS SIMPLE METHOD:

1. UNPLUG THE POWER 

2. REMOVE BATTERY 

3. HOLD POWER BUTTON FOR 30/60 SECONDS 

4. REATTACH POWER AND START THE LAPTOP 

5. SHUT BACK DOWN 

6. PUT IN THE BATTERY 

7. THATS IT 

NOTE THAT:-

If these steps solve the problem, you're done. If not, try repeating the steps and selecting an older restore point (if one is available). If that still doesn't solve the problem, contact your computer manufacturer or technical support for further assistance.

.......THANK YOU FOR YOUR COOPERATION AND GOD BLESS YOU.....